|
Bathroom Light Fixture Homepage
Reliable bathroom light fixture information
Changing out bathroom light fixtures. Outlet box question?
I'm swapping out the light fixture above the mirror in my bathroom. Upon removing the old one, I found a pancake box instead of the usual deep box with the metal arms. I can't tell what is behind the pancake box. Are these always screwed into studs? Though it appears it might be nailed. I need to know what to do because my new fixture is fairly heavy. Thanks So for my heavy fixture, is this box sufficient since it's nailed into a stud?
How do I get rid of the outline of an old bathroom light fixture?
I replaced the light over the mirror vanity in my bathroom with another wall bracket fixture. I painted at the same time, and didn't really notice that I can still see the outline from the old fixture. It's been a couple years now, and I have the time to fix it. It looks like a rectangle of excess paint. What's the best way to get rid of this? Sanding? If so, what grit?
In a bathroom light fixture which wires are positiveand negative?
Can I remove rust from a bathroom light fixture without scratching it?
I have a bathroom light fixture that over the years has developed a considerable amount of rust from all the steam and condensation. is there a way of removing reducing the rust without scratching the chrome surface? Some type of non abrasive cleaner?
What kind of paint should I use for bathroom light fixtures?
Is it bad to use acrylic paint like I use for crafts?
Installing bathroom light fixture 2 black and 2 white wires?
Hi, i'm installing a light fixture basic 1white and 1black , there are 2 cords coming out of the hole in the wall, each contains 1 black and 1 white wire copper ground wire. I've tried connecting all 3 whites and all 3 blacks but this just trips the breaker. I have not connected the ground wires when trying this so may this be the problem?I am have alternated different combos of black and whites but the best i can achieve is to get the light to come on permanently w o the switch working. Any suggestions?
Where can you buy a bathroom light fixture in Vancouver that has a plug for your hairdryer on the fixture?
Hi, I am replacing a bathroom light fixture with a three-way switch. Have 2 red, 2 black, 2 white...?
and a ground wire. So we have one light fixture that is controlled by one light switch and controlled by another one in the same room. The wires all appear under the same fixture. So behind the fixture is 2 black, 2 red, 2 white, and 2 ground. We were told by many people that the white wires should be together, so we put them together. Then we are left with 2 black 1 from each switch and 2 red 1 from each switch . We had it setup where we had a black and a red wire from the same switch together. Then we had the other black and red wires doing nothing. Behind the light fixture is a black and white wire. We connected the white to the 2 white wires and the black wire to the black red wires we tied together. It allowed the light to work and but I tried to switch the light off and it would flicker. Meaning, it would turn off the light for a split second when we turned the light switch off. And it did the same thing turning the light switch on. If you hold the switch in the middle, it would turn off. Weird. Please help.By the way, we understand the risk of doing this ourselves. Just to get that out of the way.
How do you center a bathroom light fixture if the anchor box is not centered?
I'm replacing my light fixture and come find out the hole where the wires come out of the wall is not centered with the faucet and mirror. How do I center a new fixture? Do I have to make the hole larger and and reposition the bracket?
The bathroom light fixture over the sink just flicks on for half a second every time I flip the light switch.?
It's a double switch, also controls the fan, that works. The only electrical outlet works too. It's not the fixture, I tried a new one, same problem. SO WHAT THE HECK IS GOING ON ???
How do I change the light bulb in this bathroom light fixture?
img684.imageshack.us i img20100911164205.jpgimg203.imageshack.us i img20100911164216.jpgIt has a fan built in with vents on the side. I can feel 4 little bolts inside of it, but if I were able to easily remove them, getting them back in would be a nightmare. I even went in the attic and found the light box, but it is sealed.Any help would be appreciated.Fixing linksimg684.imageshack.us i img20100911164205.jpg img203.imageshack.us i img20100911164216.jpg Thanks guys, I was able to figure it out. It turns out that the lens pops out easily. I was trying to move it forward to back, but side to side did the trick.
Why would a light bulb explode? One of the 5 bulbs in my bathroom light fixture exploded when we flipped it on
The light fixture in our master bathroom holds 6 bulbs. Currently, there are 5 GE brand " Reveal" 40 watt, medium base, blunt shape, decorative bulbs. For some reason, when we turned on the lightswitch tonight, the bulb in the center exploded, scattering glass bulb pieces everywhere.
Bathroom Light Fixture?
I have a light fixture over my bathroom sink. It has 3 round lights in a row. Thex are sort of sticking out of a metal? box with a wood trim. There is this UGLY gold metal type stuff right behind the bulbs. Is there ANYTHIMG I cando to either cover u p the metal or something??
Bathroom light fixture help?
We want to remodel our bathroom from 80's style ugly medicine cabinet with built in light to something nicer looking. The problem I'm noticing is the medicine cabinet's light is the only light for the bathroom. I do like the portfolio light fixtures compared to the ugly multiple globe bulb light fixtures, but am afraid the portfolio light fixture won't cast light throughout the whole bathroom. Is my thinking correct?
|
|
